Sign In | Join Free | My vivirlatino.com
vivirlatino.com
Guangxi Chentian Metal Products Co., Ltd
Proposal: Bright Ideas Imports--Guangxi ChenTian's Tungsten Heavy Metal for Military
Home > Tungsten Alloy for Military >

Tungsten alloy swaging rod for armor piercing

Tungsten alloy swaging rod for armor piercing

Place of Origin : China
Brand Name : CHENTIAN
Model Number : 022
Contact Now

Tungsten alloy swaging rod grades under transient high heat loads
Transient high heat loads simulations by using the electron beam facility have been performed on two tungsten heavy alloy swaging rod grades at several power loads with a pulse duration of 5ms
The cracking patterns of the two tungsten heavy alloy swaging rod grades are quite similar
All cracks occurred along the grain boundary and located across the loaded area
The cracks can be distinguished with two levels, major cracks with larger crack width but lower crack density and micro cracks with smaller crack width but higher crack density
The higher the deformation level of tungsten alloy swaging rod for armor piercing and heat loading power density, the smaller the major crack density will be, but there is no obvious difference in the micro cracks pattern
No melting occurred for both tungsten alloy swaging rod grades after transient heat loading at power density of 0.88 GW m−2
Types of tungsten alloy swaging rod for armor piercing projectile introduction
Tungsten alloy swaging rod for armor piercing projectile which is made of tungsten alloy comprising a high density penetrator core with a tapered front end and a multi-part outer case in partial contact with the core
This kind of armor piercing projectile will not penetrate because the multi-part jointed case is not as strong as a single-piece, monolithic case
Also, since the hard core is loose and not bonded to the case, then the core cannot provide additional structural support. In addition, tungsten alloy swaging rod for armor piercing projectile does not have the ability to either explosively damage the target after penetration, or take data from an instrumentation package during or after penetration
"Hollow-point" design results in radial expansion of the jacket into "petals" as the tungsten alloy swaging rod travels through the target, such as "flowering" of the case upon impact severely limits the depth of penetration into hardened targets
Tungsten alloy swaging rod for armor piercing projectile comprising a heavy metal core and a segmented sabot with both right-handed and left-handed threads that separates from the core after exiting the gun's nozzle
It will not penetrate deeply because the nose end is made of a brittle heavy metal alloy, rather than high-strength steel
Also, it requires the use of a discarding sabot carrier
Tungsten alloy swaging rod for armor piercing projectile with a speculating core comprising an elongated arrow style it is of a core surrounded by a body, where the hardness of the core is greater than twice the hardness of the body
The outer case is made out of tungsten alloy swaging rod
The brittle behavior of these alloys will prevent this from achieving deep penetration in hardened targets, when compared to cases made of high-strength and high-toughness steel alloys


China Customized Inflatable Bumper Ball Game Bubble Adult Grass CE supplier

Tungsten alloy swaging rod for armor piercing Images

Inquiry Cart 0
Send your message to this supplier
 
From:
Enter your email please.
To: Guangxi Chentian Metal Products Co., Ltd
Subject:
Message:
Characters Remaining: (0/3000)
 
Inquiry Cart 0